PRINT/CALIBRATION
Select the appropriate paper size based on your country's standard, either Letter or A4. When printing, ensure you use your local printer driver and set the print scale to 100%. Avoid using browsers like Chrome for printing, as they might cause scaling issues.
To verify that the print is to scale, either use another piece of paper or, if you have one handy, use a tape measure to check the spacing of the grey lines. They should be at 1 cm intervals, with longer measurements being more accurate.
CUT/TAPE
1. Cut out the parts on the dotted lines.
2. Cover the dotted lines with tape to reinforce the path you intend to cut. This will prevent the paper from tearing when you thread it through like a belt.
3. Overlap the pieces with tape on both the top and bottom to ensure additional strength when tightening the band.
4. Fold and cut slots for band
WEAR IT
1. After everything is taped up, the slots are cut, and you’ve chosen a name for your headband, thread the narrow end of the headband through the slots.
X
TAPE STRAP
2. Ensure that the thinnest part of the headband is positioned on the forehead. Gently pull the headband to press the hair down and secure it to the rest of the headband using tape, as shown at the X.
WRITE NAME HERE
3. Tape the top of the head strap to the front of the headband. Then, pull the back of the strap to press the hair down and secure it to the back of the head strap.
NEXT STEP
This website makes use of cookies. Please see our privacy policy for details.
